Lu’s Technology Co., Limited
Add to Cart
Model:
Li-Polymer battery 401230
3.7V rechargeable batteries
Polymer lithium battery PL401230
Lithium ion battery
Li-ion Polymer Battery
Lithium Polymer Battery 401230 3.7V 100mah
Li-Polymer battery Product Advantages:
1) Environmental friendly
2) High density of energy
3) Light weight
4) Low self-discharge
5) Low internal resistance
6) Long cycle life, chargeable up to 500 or 1000 times
7) No memory effect
8) Doesn’t contain Mercury, No fire, No explosion, No leakage
9) Very good and quick charge, capability can be charged to 90% within 10 min.
10) Thickness can be adjusted while width and height keep the same
Major Application:
1) MP3/MP4 player, bluetooth, speakers, car GPS and all possible electronics products
2) Widely applied in Telecommunications, Audio and Video Devices, Information Devices...Etc.
Specification:
| No.
| Item
| General Parameter
| Remark
| |
| 1 | Rated Capacity
| Typical
| 100mAh | Standard discharge(0.5C5A) after Standard charge
|
| Minimum
| 95mAh | |||
| 2 | Nominal Voltage
| 3.7V | Mean Operation Voltage
| |
| 3 | Voltage at end of Discharge
| 2.5V | Discharge Cut-off Voltage
| |
| 4 | Charging Voltage
| 4.2±0.03V | ||
| 5 | Internal Impedance
| ≤300mΩ | Internal resistance measured at AC 1KHZ after 50% charge
| |
| 6 | Standard charge
| Constant Current 0.2C5A/20mA Constant Voltage 4.2V 0.01 C5A cut-off
| Charge time : Approx 6.0h
| |
| 7 | Standard discharge
| Constant current 0.5C5A /50mA end voltage3.0V
| 50mA | |
Standard Test Conditions:
Test should be conducted with new batteries within one week after shipment from our factory
and the cells shall not be cycled than five times before the test.
Unless otherwise specified, test and measurement shall be done under temperature of 20±5℃
and relative humidity of 45~85%.
If it is judged that the test results are not affected by such conditions, the tests may be
conducted at temperature 15~30℃ and humidity 25~85%RH.
Appearance
There shall be no such defect as flaw, crack, rust, leakage, which may adversely affect
commercial value of battery.
Polymer Lithium Battery 3.7V 100mah LP401230:
